Matrix Camera, Composed Television System for the Detection of the Contact Wire
Abstract
A method for increasing the efficiency of the contact wire detection system by upgrading hardware and software elements of the system is presented. The substantiation of the choice of a new element base, as well as the development of new software. The functional diagram of the camera on the basis of high-speed video data transfer protocol Camera Link, and the image capture algorithm with a matrix sensor.
About the Authors
V. I. Sirotinin
Saint Petersburg Electrotechnical University "LETI"
Russian Federation
Russian Federation
P. V. Stolbov
Saint Petersburg Electrotechnical University "LETI"
Russian Federation
Russian Federation
A. V. Voronin
Open JSC "MSD-Holding" (Saint Petersburg)
Russian Federation
Russian Federation
References
1. Сафин В. Г. Метрологические характеристики устройства дистанционного измерения параметров контактного провода "Телекс-2" // Изв. СПбГЭТУ "ЛЭТИ". 2010. № 9. С. 4-5.
2. Железнодорожный транспорт: энциклопедия / под ред. Н.С. Конарева. М.: Изд-во БРЭ, 1994. 559 с.
3. Горбачёв А. А., Коротаев В. В., Ярышев С. Н. Твердотельные матричные фотопреобразователи и камеры на их основе. СПб.: Изд-во НИУ ИТМО, 2013. 98 с.
4. Specifications of the Camera Link Interface Standard for Digital Cameras and Frame Grabbers. URL: http://www.fastvideo.ru/info/cameralink/CameraLinkOfficial.pdf (дата обращения 17.07.2016).
5. Попов А. Ю. Проектирование цифровых устройств с использованием ПЛИС: учеб. пособие. М.: Изд-во МГТУ им. Н. Э. Баумана, 2009. 80 с.
Review
For citations:
Sirotinin V.I., Stolbov P.V., Voronin A.V. Matrix Camera, Composed Television System for the Detection of the Contact Wire. Journal of the Russian Universities. Radioelectronics. 2016;(4):50-55. (In Russ.)
Views:
467
Email this article 