Calculation of Band-Pass Filters with Fixed Frequencies of Infinite Attenuation

Introduction. When calculating band-pass filters (BPF) with infinite attenuation frequencies using the frequency conversion method, the parameters of the prototype – an inverse or quasi-elliptic low-pass filter (LPF) – are recalculated into BPF parameters according to conventional formulas. Using the selected low-pass filter cutoff frequency and the Q-factor of the band-pass filter, one can select at their discretion only one infinite attenuation frequency (attenuation pole). In order to suppress a pair of concrete frequencies in the attenuation band, the synthesis of BPF should initially fix the frequencies of maximum attenuation and the central frequency of the filter. The reverse transition toward the frequency response parameters of a low-frequency prototype is carried out using frequency conversion formulas.

Aim. To develop of a method for calculating band-pass filters with fixed attenuation poles.

Materials and methods. Odd-order filters with an additional capacitor in the transverse branch of the П-link and an inductance in the longitudinal branch of the Т-link were used as low-frequency prototypes of the BPF with attenuation poles. Approximation of the frequency response of a low-frequency prototype (inverse or quasi-elliptical LPF) was performed by methods based on solving systems of nonlinear equations.

Results. A realizable transfer function (TF) of an n-th order LPF with attenuation poles was written as the ratio of the product of binomials and a polynomial of power n with real coefficients. Systems of equations were derived to determine amplitude-frequency response coefficients with a given frequency of maximum attenuation interference for both types of filters. Analytical expressions for the TF of the low frequency prototypes of 3th and 5th orders were recorded through the capacitances of the BPF circuits tuned to the central and suppressed frequencies, thus allowing the desired capacitances to be directly calculated. The BPF inductances were determined by formulas expressing the dependences of the BPF central frequency on the circuits parameters, taking into account the relationships given in the article. An example of calculating a 10th order quasi-elliptic BPF was provided.

Conclusion. The proposed method can be used to determine the BPF parameters directly, without an intermediate calculation and subsequent transformation of the LPF prototype parameters. The given analytical expressions for the frequency response of the П- and Т-shaped BPFs of the 6th and 10th orders make it possible to verify the performed calculations and to correct the frequency response using inductances, when replacing the calculated capacitance values with their standard values.

1. Popov P. А. Raschet chastotnykh elektricheskikh fil'trov [Calculation of Frequency Electric Filters]. Moscow, Energia, 1966, 216 p. (In Russ.)

2. Jonson D., Jonson J., Moore H. A Handbook of Active Filters. New Jersy, Prentice-Hall, Inc., Englewood Cliffs, 1980, 128 p.

3. Thede L. Practical Analog and Digital Filter Design. Artech House, Inc., 2004, 267 p.

4. Hercules G. Dimopoulos Analog Electronic Filters. Theory, Design and Synthesis. Springer, 2012, 498 p.

5. Paarmann L. D. Design and Analysis of Analog Filters: A Signal Processing Perspective. Dordrecht, Springer, 2014, 456 p.

6. Chervinskiy E. N. Realization of Electrical Ladder-Structure Filters. J. of the Russian Universities. Radioelectronics. 2013, no. 3, pp. 24–37. (In Russ.)

7. Zverev A. I. Handbook of filter synthesis. John Willey and Sons, Inc., N. Y., London, Sydney, 1967, 576 p.

8. Saal R. Handbuch Zum Filterenwuef. AEG - Telefunken, Berlin, 1979, 663 p.

9. Bukashkin S. A., Vlasov V. P., Zmii B. F., Kalyakin A. I., Krutchinskii S. G., Kuflevskii E. I., Lanne A. A., Maslennikov V. V., Men'shikov A. M., Mikhalev P .G., Petrakov V. A., Sirotkin A. P., Slavskii G. N., Styts'ko V. P. Spravochnik po raschetu i proektirovaniyu ARC-skhem [Handbook of Calculation and Design of ARC-Circuits]. Ed. by A. A. Lanne. Moscow, Radio & communication, 1984, 368 p. (In Russ.)

10. Matkhanov P. N. Osnovy sinteza lineinykh elektricheskikh tsepei [Basic of Linear Electrical Circuits Synthesis]. Moscow, Vysshaya shkola, 1978, 208 p. (In Russ.)

11. Chervinskiy E. N. Computation of Transfer Functions of Filters with Equiwave at the Section and Infinite Half-Interval Amplitude-Frequency Characteristics. J. of the Russian Universities. Radioelectronics. 2014, no. 4, pp. 13–28. (In Russ.)

12. Herrero J., Willoner G. Synthesis of Filters. Frenytice-Hall, inc., Englewood Cliff N. J., 1966, 232 p.

13. Valkenburg M. E. Analog Filter Design. CBS College Publishing, 1982, 608 p.

14. Winder S. Analog and Digital Filter Design. 2-nd ed. New York, Elsevier Science, 2002, 450 p.

15. Bosyi N. D. Elektricheskie fil'try [Electrical filters]. Kiev, State publishing house of technical literature, 1957, 516 p. (In Russ.)